info@epiclifts.com
+ 971 50 658 8263
Stiltz Lifts

Trio+

The Stiltz Trio+ Lift is an innovative 3-Person Home Lift that is as versatile as it is attractive. The Trio+ is wheelchair accessible with a gently-angled ramp and is powered by 240V. It is as simple as plugging in your refrigerator socket.
For larger families or for those who need to accommodate a full-sized wheelchair, the Stiltz Trio+ Home Lift is the perfect solution. The intelligent styling of this wheelchair lift allows for a wider entrance, with the self-supporting ‘stilts’ recessed discreetly in the sides of the lift car.

The Trio+, like the entire Stiltz range, benefits from full or half-height door options with the added benefit of a light curtain which provides an extra level of safety and security for users, inside and out.

  • Standard Finishes: Trio+: pale warm grey construction with clear polycarbonate lift car body. 
  • Half Height Door The door is interlocked and is made to match the finish of the lift.
  • 2 x Remote Controls Call and send the lift remotely and also use it to move heavy or awkward items between floors.
  • One Year Warranty All Stiltz Lifts carry a comprehensive 12 monthly parts and labor warranty which includes 1st year’s service. Maintenance packages are available at extra cost.
  • Internal LED Downlights These are programmed to turn on once the user has entered the lift and they remain on for the entire journey.
  • Battery Back-Up System If there is a power cut while using the lift it will descend to the lower level of the home and wait until the power comes back on.
  • Full Height Light Curtain Light Curtain when fitted with a half-height door.
  • Interior Telephone In the very unlikely event that the lift stops while you are traveling in it, help is just a phone call away.
  • Fold Down Seat This is a popular option selected by customers for the short trip between floors.
  • Interior Grab Rail Offers increased security for the occupants of the lift.
  • Full Height Door An interlocked door that replaces the half-height door and light curtain.
  • Full Height Light Curtain A full-height motion sensor is situated at the entrance of our lifts (unless a full-height door is chosen). If this barrier is crossed the lift will immediately stop.
  • Safety Lid Plug This crucial feature plugs the aperture in the floor when the lift is in the downstairs position. It is strong enough to stand on and you can place your original flooring on top to blend in. (Valid on Thru-Floor Configurations Only)
  • Key Switch Operation This feature allows the owner to isolate the lift if the need arises. This is commonly used when going away on holiday or when the grandchildren are around.
  • Top & Bottom Safety Pans Using our obstruction sensing covers, a Stiltz Lift can detect objects above or below the lift, causing it to immediately stop.
  • Hold-To-Run Controls Operating a Stiltz Lift requires constant pressure on the controls. This allows the user to ‘drive’ the lift and feel in total control.
  • Weight Limit Sensors Our Trio+ Lifts are limited to 220Kg/ 485lbs. The lift detects anything exceeding this limit and will not travel.
  • Out Of Balance Sensors Sensors will detect if the lift is ever out of balance and prevent the unit from traveling.
  • Fall Arrest Mechanism This patented system prevents the car from falling in the unlikely event of the steel ropes going slack.
  • Emergency Stop Button This button is front and center for the user in the event of an emergency.
  • Over Speed Detection The lift uses an optical sensor to detect the speed of travel. If this increases beyond a certain speed, the sensor will stop the lift from traveling in that direction.

Stiltz Lifts are inherently simple in design and concept but if you wish to dig a little deeper, you can download all the information you need below.

Drive Roped drum, braked gear motor drive

Power 

Supply

220 – 240v AC | 5 Amps
Maximum Load 220kg | 375lb 
Maximum Travel One Floor with Intermediate Landing Option. With a maximum of 6000mm of travel.
Entrance Security Full height light curtain / motion sensor – optional full height door
Maximum Speed Up to 15cm / second
Warranty 12 months parts and labour warranty
Compliance European Machinery Directive 2006 / 42 / EC & Australian Standard 1735 Part 15
Rope Diameter 6mm Galvanized steel rope
Additional Sensors Out-of-balance & overload, overspeed detection and light curtain
Lighting Type 4 x 3w LED downlights
Landing Call Stations 2 Wireless remote control units – call / send facility (3 x standard aaa batteries in each)
Installation Typical installation takes two days
Operation Hold-to-run controls
ConfigurationSingle entry or double entry (Thru Car)
Power Connection The lift is powered via a cable to the power point which is typically positioned downstairs behind the left-hand vertical rail. Consequently, the trailing cable may be visible from behind the lift depending on installation type and location