info@epiclifts.com
+ 971 50 658 8263
Stiltz Lifts

Duo+

The Stiltz Duo Home Lift is a unique and innovative domestic lift that can be fitted almost anywhere in the home. Compact and attractive, it will carry 2 people in style and comfort.

  • Standard Finishes Trio+: pale warm grey construction with clear polycarbonate lift car body. 
  • Half Height Door The door is interlocked and is made to match the finish of the lift.
  • 2 x Remote Controls Call and send the lift remotely and also use it to move heavy or awkward items between floors.
  • One Year Warranty All Stiltz Lifts carry a comprehensive 12 months parts and labour warranty which includes 1st year’s service. Maintenance packages available at extra cost.
  • Internal LED Downlights These are programmed to turn on once the user has entered the lift and they remain on for the entire journey.
  • Battery Back Up System If there is a power cut while using the lift it will descend to the lower level of the home and wait until the power comes back on.
  • Full Height Light Curtain Light Curtain when fitted with a half height door.
  • Interior Telephone In the very unlikely event that the lift stops while you are traveling in it, help is just a phone call away.
  • Fold Down Seat This is a popular option selected by customers for the short trip between floors.
  • Interior Grab Rail Offers increased security for the occupants of the lift.
  • Full Height Door An interlocked door that replaces the half-height door and light curtain.
  • Full Height Light Curtain A full-height motion sensor is situated at the entrance of our lifts (unless a full-height door is chosen). If this barrier is crossed the lift will immediately stop.
  • Safety Lid Plug This crucial feature plugs the aperture in the floor when the lift is in the downstairs position. It is strong enough to stand on and you can place your original flooring on top to blend in. (Valid on Thru-Floor Configurations Only)
  • Key Switch Operation This feature allows the owner to isolate the lift if the need arises. This is commonly used when going away on holiday or when the grandchildren are around.
  • Top & Bottom Safety Pans Using our obstruction sensing covers, a Stiltz Lift can detect objects above or below the lift, causing it to immediately stop.
  • Hold-To-Run Controls Operating a Stiltz Lift requires constant pressure on the controls. This allows the user to ‘drive’ the lift and feel in total control.
  • Weight Limit Sensors Our Trio+ Lifts are limited to 170kg/ 375lbs. The lift detects anything exceeding this limit and will not travel.
  • Out Of Balance Sensors Sensors will detect if the lift is ever out of balance and prevent the unit from traveling.
  • Fall Arrest Mechanism This patented system prevents the car from falling in the unlikely event of the steel ropes going slack.
  • Emergency Stop Button This button is front and center for the user in the event of an emergency.
  • Over Speed Detection The lift uses an optical sensor to detect the speed of travel. If this increases beyond a certain speed, the sensor will stop the lift from traveling in that direction.

Stiltz lifts are inherently simple in design and concept but if you wish to dig a little deeper, you can download all the information you need below.

DriveRoped drum, braked gear motor drive

Power

Supply

220 - 240v AC | 5 Amps

Maximum

Load

170 kg | 375 lb ( 2 persons standing or 1 person sitting)

Maximum

Travel

4500mm

Entrance

Security

Full height light curtain / motion sensor - optional full height door

Maximum

Speed

Up to 15cm / Second
Warranty12 months parts and labor warranty
ComplianceEuropean Machinery Directive 2006 / 42 / EC & Australian Standard 1735 Part 15

Rope

Diameter

6mm Galvanized steel rope
Additional SensorsOut-of balance & overload, overspeed detection and light curtain

Lighting

Type

2 x 3w LED downlights

Landing Call

Stations

2 Wireless remote control units - call / send facility (3 x standard AAA batteries in each)
InstallationTypical installation takes two days
OperationHold-to-run controls
Power
Supply
The Lift is powered via a cable to the power point which is typically positioned downstairs behind the left-hand vertical rail. Consequently, the trailing cable may be visible from behind the lift depending on installation type and location.